Envirolyte EL-300: value in a small package


Key features & benefits Automated Envirolyte Machines ELA-300 ELA-400 ELA-600 ELA-900 ELA-1200 ELA-1600 ELA-2400 ELA-3000 ELA-5000 ELA-6000 ELA-10000 Manual Envirolyte Machines EL-300 EL-400 EL-600 EL-900 EL-1200 EL-1600 EL-2400 EL-3000 EL-5000 EL-6000 Envirolyte Sea Water Units Envirolyte Water Ionizers Envirolyte - Portable unit Envirolyte Service kit

The Envirolyte EL-300 units have been designed to produce activated solutions (Anolyte and Catholyte).
Easy operating procedures give the added benefit to rapid delivery of safe and fast acting biocide-Anolyte

Envirolyte EL-300

The Envirolyte EL-300 unit has been developed to produce ~300L per day of Anolyte and ~150L per day of Catholyte on the spot and on demand when disinfecting, sterilisation and water purification are required.

The weight and dimensions of the unit are kept low and small to ease handling, maintenance and transportation.
The strength of Anolyte in terms of active chlorine concentration can be adjusted by current setting.

I Features of Envirolyte EL-300

A self-cleaning cycle has been programmed into the machine, which ensures easy maintenance,long life-time and maximum productivity.
The unique design of the central core ensures the electrolyte used in the processing of solutions has maximum contact with the electrodes and therefore ensures the most efficient use of energy and low salt consuption.

There is a minimal hydraulic resistance against liquids flowing through the core chambers and therefore optimum flow rate is achieved.
The electrodes are specifically designed to endure high electrochemical loading as are the membranes, which separate the activated solutions.
The enclosure is made of non-corrosive materials. Tubes and connectors are of EPDM/PVDF plastics and are highly resistant against aggressive solutions.
A simple on/off switch with a power indicator starts and stops the unit manually.

II Specifications of Envirolyte EL-300

Envirolyte ^�

Code EL-300

Enclosure:

400x300x180mm (hxwxd)

Weight:

14,5 kg

Input power:

230 VAC +-10%

Power consumption:

~740W

Electrolyser:

model HI40536

Total output capacity:

~400L per day

~300L per day Anolyte:

(pH 2-3.5, ORP>1100mV, C.ac ~500mg/l)

~100L per day Catholyte:

(pH 11-13, ORP < -900mV)

~300L per day ANOLYTE

This solution has a pH value of 2.0 to 3.5 and can be used wherever there is a need to disinfect or sterilise in applications where the pH is unimportant and where there is a need to reduce the pH level of the water to be treated.

Amps	active chlorine mg/l	pH	ORP mV (redox-potential)
~28-30	~500	2.0-3.5	>1100

~100L per day CATHOLYTE

Alkaline CATHOLYTE has a pH between 11 and 13 can be used for flocculation (e.g. of heavy metals), coagulation, washing, extraction. Furthermore this solution can be used to wash wounds (instead of using iodine) and wherever there is a need to increase pH level of the water to be treated.

Amps	active chlorine mg/l	pH	ORP mV (redox-potential)
~28-30	0	11-13	-900<

For instruction details on specific applications please send Your enquiry.