|
|
- The Envirolyte Industries International Ltd. launched Envirolyte EL-1200 in February, 2001 along with Envirolyte EL-1600 after intensive consultations with our customers and partners and their continued requests for Envirolyte units with higher output capacity.
- The Envirolyte EL-1200 unit has been designed for production of activated solutions - Anolyte (acidic) and Catholyte.
- Easy operating procedures give the added benefit to rapid delivery of safe and fast acting disinfectant - Anolyte and a perfect washing and biostimulating solution - Catholyte
|
 Envirolyte EL-1200 |
|
- The Envirolyte EL-1200 unit has been developed to produce Anolyte (~1200L per day) on the spot and on demand when disinfecting, sterilisation and water purification are required and Catholyte (~400L per day) as a valuable by-product.
|
|
- The weight and dimensions of the unit are kept low and small to ease handling, maintenance and transportation. Despite the fact that the size of Envirolyte EL-1200 is bigger then the size of EL/ELA-600 / EL/ELA-900 the unit still remains portable.
- The strength of Anolyte in terms of active chlorine concentration can be adjusted by current setting.
|
|
|
|
I Features of Envirolyte EL-1200 |
|
- A self-cleaning cycle has been programmed into the machine, which ensures easy maintenance and maximum productivity.
- The unique design of the diaphragmatic cell ensures that electrolyte used in the processing of solutions has maximum contact with the electrodes and therefore ensures the most effective use of energy and minimum salt consumption.
|
 |
- There is a minimal hydraulic resistance against liquids flowing through the cell chambers and therefore an optimum flow rate is achieved.
- The electrodes are specifically designed to endure high electrochemical loading as are the membranes, separate the solutions.
- The enclosure is made of non-corrosive materials. Tubes and connectors are of EPDM/PVDF plastics and are highly resistant against aggressive solutions.
- A simple on/off switch with a power indicator starts and stops the unit manually.
- No moveable or replaceable parts.
|
|
II Specifications of Envirolyte EL-1200 |
|
| Envirolyte ® |
Code EL-1200 |
| Enclosure: |
500x400x200mm (hxwxd) |
| Weight: |
21,5 kg |
| Input power: |
230 VAC +-10% |
| Power consumption: |
~2,1 KWT |
| Total output capacity: |
~160L per hour |
| ~80-120L per hour of Anolyte: |
(pH 2 - 3.5, ORP>1100mV, C.ac ~500mg/l) |
| ~40~80L per hour of Catholyte: |
(pH 11-13, ORP < -900mV) |
|
|
|
|
| |
~800-1200L per day of ANOLYTE |
| |
This solution has a pH value of 2.0 to 3.5 and can be used wherever there is a need to disinfect or sterilise in applications where the pH is unimportant and where there is a need to reduce the pH level of the water to be treated.
|
| Amps |
active chlorine mg/l |
pH |
ORP mV
(redox-potential) |
| ~50 |
~500 |
2.0-3.5 |
>1100 |
|
|
| ~400-800L per day of CATHOLYTE |
| |
Alkaline CATHOLYTE has a pH between 11 and 13 can be used for flocculation (e.g. of heavy metals), coagulation, washing, extraction. Furthermore this solution can be used to wash wounds (instead of using iodine) and wherever there is a need to increase pH level of the water to be treated.
|
| Amps |
active chlorine mg/l |
pH |
ORP mV
(redox-potential) |
| ~50 |
0 |
11-13 |
-900< |
|
|
|
|
|
Application: Sea water disinfecting and other disinfecting procedures at hatcheries in  Malaysia
|
|
For instruction details on specific applications please send Your enquiry.
|
