|
|
- The Envirolyte ELA-6000 is a further development of fully automated Envirolyte machines to suite our customers qrowing needs for bigger volumes of activated solutions.
- The Envirolyte ELA-6000 has been designed for production of Neutral Anolyte only with the option to adjust Ph in the range of Ph ~5.0 - 8.5
|
 Envirolyte ELA-6000 |
- Full automation and easy operating procedures give the added benefits to rapid elivery of safe and fast acting disinfectan - Neutral Anolyte.
- The strenght of Neutral Anolyte in terms of active chlorine concentration is preset during manufacturing but can be adjusted according to customers requirements.
|
|
|
|
I Features of Envirolyte ELA-6000 |
|
- The control system of ELA-6000 units is simple and easy to operate. It can be altered to suit different applications and conditions.
- A flow controller is installed in the Hydraulical part to shut the Envirolyte unit if there is interruption of water supply and to start the unit as soon as water flow resumes.
- Variable brine pump ensures a required dosage at any given time.
|
 Electrical enclosure of ELA-6000 |
- The enclosures are made of non-corrosive materials. Tubes and connectors are of EPDM/PVDF plastics and are highly resistant against aggressive solutions.
|
 Hydraulic enclosure of ELA-6000
|
- All input and output connectors are located on the sides of the boxes to allow them wall-mountable.
- A simple on/off switch with power indicator starts and stops the ELA-6000 units manually.
|
- Level switches enable to start and stop ELA-6000 unit automatically.
- Reset button alows to Start the unit regardless of the lewel switchers position.
- Alarm is inbuilt in the unit but can be arranged in any remote area through external connection.
|
II Specifications of Envirolyte ELA-6000 units |
|
| Envirolyte ELA-6000 units |
Code ELA |
| Hydraulic enclosure IP66: |
800x600x300mm (hxwxd) |
| Electrical enclosure IP66: |
800x600x300mm (hxwxd) |
| Power source: |
230 / 110 VAC ±10% |
| Power consumption: |
~5.5 KWT |
| Max. output capacity: |
~600L per hour of ANK-anolyte |
| Automation: |
start/stop by means of two level switches |
| Flow controller: |
flow/no-flow protection, alarm and automatic start/shutdown |
| Peristatic brine & acid pumps: |
-24vDC |
| Input valve: |
-24vDC/6BAR |
| Mains water pressure: |
~2.5 - 3 Bars |
Envirolyte ELA-6000/CMU-industrial stand-alone unit with current stabilisation,
automated flushing and water cooling system designed according to the
specifications from agro-industry for treatment of compound feed raw materials,
beer/beverages, food processing and water treatment industries.
Envirolyte ELA-6000 industrial stand-alone unit with current stabilisation,
PCL control of operation and maintenance procedures as well as diagnostics of
all features of unit through Internet and/or PC.
|
| |
|
Neutral Anolyte |
|
|
| Regime |
active chlorine mg/l |
pH |
ORP mV
(redox-potential) |
Type of Envirolyte generator |
| Neutral Anolyte |
~500-700 |
~5.0-8.5 |
~700-900 |
ELA-6000 |
|
|
|
III Spares & Service Parts |
|
All of the system components are modular for easy servicing & replacement
|
|
|
|
Application: Fish breeding in Germany
Application: CIP cleaning at brewery (EU)
Application: Diary farming in Germany
Application: Prime feed disinfection to prevent Salmonella contamination and eliminate toxins (EU)
Application: Prime feed disinfection to prevent Salmonella contamination and eliminate toxins (Holland)
Application: Waste water treatment of a milk factory in Lithuania
|
For Envirolyte ELA-6000 instruction details or applications please send Your
enquiry.
|
