 |
|  |
| |
|
By nature, agricultural raw materials are loaded with numerous microbic organisms. Either before or during harvesting, processing at the factory (operators, processing floor included) or during shipment, storage. Agricultural raw materials are also potential reservoirs for cross contamination. Possible rapid development of bale bacteria but also pathogenic species like salmonella, E.coli and toxin producing fungi, can lead to huge economical impact and potential dangers for endconsumers.
|
Microbiogical load on raw and processed feed materials |
Example: presence of salmonella on soybeanmeal (pellets) in shipments towards the EC: 2002 – 2006
Some statistics:
Report from the EFSA ( European Food Safety Authority : RASSF)
|
(*): source: Annual report EFSA 2005
Report from the EFSA ( European Food Safety Authority: RASSF)
(*): source: Annual report EFSA 2005
- Thermal treatment of products
- Different applications of biocides, fungicides on raw materials
- Application of other hazardous chemicals : acidifiers like propionic acid, formaldehyde,…
- Moisture control during processing
- AW control ( water activity of the (processed) raw material)
- Temperature control
- Some of them are too labour intensive
- Some are costly
- Some are not efficient enough
- Some are limited due to toxicity issue
- Some are hazardous
Anolyte application
- Limited addition of anolyte depending on basic moisture content, AW level and final desired and acceptable moisture content
- Neutral pH of anolyte solution
- On site production of anolyte: maximum potential
- Application by high pressure fogging / spraying otherwise adverse effects (local high humidity zones)
- Mixing zone after application (maximum contact)
Drawing of a typical installation of Envirolyte® Feedlyte® system
Anolyte efficacy
- Up to 6 log reduction for most species including fungi, moulds
- Rapid activity
- Superior to most existing applications (acids, formaldehyde,…)
- No residues (< L.O.D.)
- No odour
- No smell
- No possible irritation
Reducing
- Microbiogical development during processing, storage, shipment. Including e.g. salmonella, enterobacteriaceae, toxin producing moulds, yeasts,…
- Self-heating risks when mid & long term storage is applied.
Enhancing
- Handling and free-flowing properties of bulkcommodities, prevents frequent raw material solidification in cells or in inner walls of bin.
Securing
- Against further contamination in the feedchain, recall, claims, financial loss.
Protecting
- Environment against toxic hazardous chemicals.
- Operators personnal health.
- Convenient
- Cheap
- Safe
- Enhanced efficacy claims
Types of Envirolyte® units used in Feedlyte® systems
For more information, please send Your enquiry
|
|
|
